1 x Phone Holder
1 x Micro USB Cable(Approx.120cm/47.2" long)
2 x Rubber Accessory
1 x Nut
1 x Clamp Ball
1.Dynamic & Static Mode
-Dynamic: Connect to power supply and put the phone on the holder, the motion arms will automatically move towards to the phone and stop until the phone is clamped tightly.
-Static: After the phone is clamped tightly, you can disconnect the power, the distance between the motion arms has been set up as same as the width of the phone.
2.Automatic motion arm to fit the phone
3.Charge for cell phone
-The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
1.Put the nut on the clamp ball, insert the ball into the screw hole at the back of the product, screw the nut tight.
2.Connect the product with power cable to the power supply.
3.Sliding your phone into the holder from the top of the motion arms, the motion arms will automatically clamp the phone. And the motion arms will automatically reset once the phone is taken away.
Name: Car holder
Installation place: Fits for most of the fixed support on auto air vent, dashboard
Fits for: Phone of 55-80mm(2.2¡±-3.1¡± width
Free shippingFree worldwide shipping and returns customs and duties tases included
Customer serviceYour payment in formation is processed securely
Secure paymentNeed to contact us？Just send us an e-mail at [email protected]
Contact usShort content about your store